RedHat 9上ADSL最终解决方案

在LINUXSIR和LINUXFANS上看了很多关于ADSL的文章,都没有解决我的REDHAT9上ADSL上网的问题,今天实在是没有办法,重新建立连接,曲折的经历,终于上网了(非常激动,可能表达的不是很好),特的写下我的过程,作为参考:

REDHAT 默认的PPPOE有问题,需要RPM -E,然后,安装这个www.roaringpenguin.com/pppoe/rp-pppoe-3.5.tar.gz(北南兄推荐)解压和安装： #tar zxvf rp-pppoe-3.5.tar.gz进入解压目录执行#sh ./go

然后再来设置ADSL。这一处，我们要用命令。

#adsl-setup

Welcome to the Roaring Penguin ADSL client setup. First, I will runsome checks on your system to make sure the PPPoE client is installedproperly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default XXX): 在这里输入ADSL的用户名

INTERFACE

>>> Enter the Ethernet interface connected to the ADSL modemFor Solaris, this is likely to be something like /dev/hme0.For Linux, it will be ethn, where 'n' is a number.(default eth0):如果一张网卡就设置写上eth0

Do you want the link to come up on demand, or stay up continuously?If you want it to come up on demand, enter the idle time in secondsafter which the link should be dropped. If you want the link tostay up permanently, enter 'no' (two letters, lower-case.)NOTE: Demand-activated links do not interact well with dynamic IPaddresses. You may have some problems with demand-activated links.>>> Enter the demand value (default no):不用写什么

DNSPlease enter the IP address of your ISP's primary DNS server.If your ISP claims that 'the server will provide DNS addresses',enter 'server' (all lower-case) here.If you just press enter, I will assume you know what you aredoing and not modify your DNS setup.>>> Enter the DNS information here:在这里写上202.96.134.133下一个DNS是202.96.168.68 //这里根据个人不同可以修改

PASSWORD

>>> Please enter your PPPoE password:输入密码>>> Please re-enter your PPPoE password:再输入一次

FIREWALLING

Please choose the firewall rules to use. Note that these rules arevery basic. You are strongly encouraged to use a more sophisticatedfirewall setup; however, these will provide basic security. If youare running any servers on your machine, you must choose 'NONE' andset up firewalling yourself. Otherwise, the firewall rules will denyaccess to all standard servers like Web, e-mail, ftp, etc. If youare using SSH, the rules will block outgoing SSH connections whichallocate a privileged source port.

The firewall choices are:0 - NONE: This script will not set any firewall rules. You are responsiblefor ensuring the security of your machine. You are STRONGLYrecommended to use some kind of firewall rules.1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation2 - MASQUERADE: Appropriate for a machine acting as an Internet gatewayfor a LAN>>> Choose a type of firewall (0-2):这里添写为2

** Summary of what you entered **

Ethernet Interface: eth0User name: XXXActivate-on-demand: NoDNS: Do not adjustFirewalling: MASQUERADE

>>> Accept these settings and adjust configuration files (y/n)?

弄完后，就按一个y键。(以上为北南兄文章里面内容)不要急于连接,REBOOT -N然后进入网络设置,停止ETH1(我的是用他)然后ADSL-STARTPING 你的DNS,如果可以,那么,恭喜你!其中部分内容可能不同,仅作参考,主要在连接后,能够PING通DNS即可!