出现grub画面上，按‘c’进入command line
分别输入以下命令：
root (hd0,0)
chainloader +1
就可以了
Enlist 于 2008-05-01 21:03:10发表:
你在红旗版找一下grub恢复的贴子
biboom 于 2008-05-01 19:45:21发表:
我打开了/boot/grub/grub.conf 里边的内容是这样的。请问该如何修改才能启动xp？
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,5)
# kernel /boot/vmlinuz-version ro root=/dev/sda6
# initrd /boot/initrd-version.img
#boot=/dev/sda
default=0
timeout=5
gfxmenu (hd0,5)/boot/message
title RedFlag (2.6.23.1-4)
root (hd0,5)
kernel /boot/vmlinuz-2.6.23.1-4 ro root=LABEL=/ vga=788 splash=silent resume=/dev/sda8
initrd /boot/initrd-2.6.23.1-4.img
title Other
rootnoverify (hd0,0)
chainloader +1
xiakelzsh 于 2008-05-02 07:00:22发表:
楼上说的即是
flay0303 于 2008-05-02 02:13:20发表:
出现grub画面上，按‘c’进入command line
分别输入以下命令：
root (hd0,0)
chainloader +1
就可以了
Enlist 于 2008-05-01 21:03:10发表:
你在红旗版找一下grub恢复的贴子
biboom 于 2008-05-01 19:45:21发表:
我打开了/boot/grub/grub.conf 里边的内容是这样的。请问该如何修改才能启动xp？
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,5)
# kernel /boot/vmlinuz-version ro root=/dev/sda6
# initrd /boot/initrd-version.img
#boot=/dev/sda
default=0
timeout=5
gfxmenu (hd0,5)/boot/message
title RedFlag (2.6.23.1-4)
root (hd0,5)
kernel /boot/vmlinuz-2.6.23.1-4 ro root=LABEL=/ vga=788 splash=silent resume=/dev/sda8
initrd /boot/initrd-2.6.23.1-4.img
title Other
rootnoverify (hd0,0)
chainloader +1