win2003下安装VM.
在vm里安了fedora7。
安装了vm tools
重启。
发现分辨率还是800*600
我想要1024*768
在显示器分辨率真设置里头只用两个。
800*600与600*4
重启时出现如下图的错误等信息。
E文不好。不明白。
求助。
要怎样才能使分辨率可以1024*768
都要哪些操作。
找了好些文章。都是那么说的。可都做了。还是不行。
一路回车的话。最后可以进入到X窗口。
上次直接安FC6（不是用VM的）的时候。不要驱动啊。。分辨率也可以上去啊。声卡也可以。
现在。声音与分辨率都不行。
而f7一开机。声卡就出现错误。
求助。。。。。
主板是技加GA-8I945G
阿亮奇 于 2007-08-24 16:37:06发表:
groub 里。偶按e了。呵呵呵。再试中。。不知道行不行。。。谢谢。。。
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
最后结果。。。。还是一样中。。。。唉。以后没有用vm。而是直接守fc6的时候。分辨率可以上很高的。。。
[ 本帖最后由 阿亮奇 于 2007-8-24 16:47 编辑 ]
阿亮奇 于 2007-08-24 16:20:48发表:
vm tools 是安装了第三次了。。。
这是第三次的安装过程。大侠们看看有问题吗？
重启后，还是出现同楼顶一样的问题。
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
[root@localhost ~]# cd /mnt
[root@localhost mnt]# ls
Fedora7.pdf VMwareTools-5.5.3-34685.i386.rpm
hgfs VMwareTools-5.5.3-34685.tar.gz
NVIDIA-Linux-x86-100.14.06-pkg1.run vmware-tools-distrib
[root@localhost mnt]# cd vmware-tools-distrib
[root@localhost vmware-tools-distrib]# ls
bin doc etc FILES INSTALL installer lib vmware-install.pl
[root@localhost vmware-tools-distrib]# ./vmware-install.pl
A previous installation of VMware software has been detected.
The previous installation was made by the tar installer (version 3).
Keeping the tar3 installer database format.
Uninstalling the tar installation of VMware Tools.
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [确定]
Guest filesystem driver: [确定]
File /etc/X11/xorg.conf is backed up to /etc/X11/xorg.conf.old.1.
File /etc/modprobe.conf is backed up to /etc/modprobe.conf.old.1.
The removal of VMware Tools 5.5.3 build-34685 for Linux completed successfully.
Thank you for having tried this software.
Installing the content of the package.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/rc.d]
What is the directory that contains the init scripts?
[/etc/rc.d/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 5.5.3 build-34685 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [确定]
Guest filesystem driver: [确定]
Trying to find a suitable vmhgfs module for your running kernel.
None of the pre-built vmhgfs modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmhgfs module for
your system (you need to have a C compiler installed on your system)? [yes]
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.21-1.3194.fc7/build/include]
Extracting the sources of the vmhgfs module.
Building the vmhgfs module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config4/vmhgfs-only'
make -C /lib/modules/2.6.21-1.3194.fc7/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.21-1.3194.fc7-i686'
CC [M] /tmp/vmware-config4/vmhgfs-only/cpName.o
CC [M] /tmp/vmware-config4/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/vmware-config4/vmhgfs-only/dev.o
CC [M] /tmp/vmware-config4/vmhgfs-only/driver.o
CC [M] /tmp/vmware-config4/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/vmware-config4/vmhgfs-only/main.o
CC [M] /tmp/vmware-config4/vmhgfs-only/staticEscape.o
LD [M] /tmp/vmware-config4/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config4/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/vmware-config4/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.21-1.3194.fc7-i686'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory `/tmp/vmware-config4/vmhgfs-only'
The module loads perfectly in the running kernel.
pcnet32 35781 0
Unloading pcnet32 module
Extracting the sources of the vmxnet module.
Building the vmxnet module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config4/vmxnet-only'
make -C /lib/modules/2.6.21-1.3194.fc7/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.21-1.3194.fc7-i686'
CC [M] /tmp/vmware-config4/vmxnet-only/vmxnet.o
/tmp/vmware-config4/vmxnet-only/vmxnet.c: 在函数 ‘vmxnet_netpoll’ 中：
/tmp/vmware-config4/vmxnet-only/vmxnet.c:1058: 错误：提供给函数 ‘vmxnet_interrupt’ 的实参太多
make[2]: *** [/tmp/vmware-config4/vmxnet-only/vmxnet.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config4/vmxnet-only] 错误 2
make[1]: Leaving directory `/usr/src/kernels/2.6.21-1.3194.fc7-i686'
make: *** [vmxnet.ko] 错误 2
make: Leaving directory `/tmp/vmware-config4/vmxnet-only'
Unable to build the vmxnet module.
The fast network device driver (vmxnet module) is used only for our fast
networking interface. The rest of the software provided by VMware Tools is
designed to work independently of this feature.
If you wish to have the fast network driver enabled, you can install the driver
by running vmware-config-tools.pl again after making sure that gcc, binutils,
make and the kernel sources for your running kernel are installed on your
machine. These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Detected X.org version 1.3.
No drivers for X.org version: 1.3.
Do you want to change your guest X resolution? (yes/no) [no] yes
Please choose one of the following display sizes (1 - 13):
[1] "640x480"
[2]< "800x600"
[3] "1024x768"
[4] "1152x864"
[5] "1280x800"
[6] "1152x900"
[7] "1280x1024"
[8] "1376x1032"
[9] "1400x1050"
[10] "1680x1050"
[11] "1600x1200"
[12] "1920x1200"
[13] "2364x1773"
Please enter a number between 1 and 13:
[3] ^[[6~
The answer "[6~" is invalid. Please enter a valid number in the range 1 to 13
Please enter a number between 1 and 13:
[3] 3
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: [确定]
Guest filesystem driver: [确定]
DMA setup: [确定]
Guest operating system daemon: [确定]
The configuration of VMware Tools 5.5.3 build-34685 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an XFree86 session.
Enjoy,
--the VMware team
[root@localhost vmware-tools-distrib]#
niudao2008 于 2007-08-18 16:44:32发表:
虚拟机为你指定了虚拟显卡，所以不要轻易改配置。我有个办法你试试：
进入蓝色背景的启动画面时，上方显示“press any key to enter the menu”,你点任意键就可以进入系统选择画面，你打个e,就会出来三个选项。你选择以“fc7.img”结尾的那个然后打个“b”就以这种么是启动了。后面又提示你使用显卡的缺省设置进入系统就能进图形界面了。
你试试吧