红联Linux门户
Linux帮助
当前位置: 红联Linux门户 > Debian

debian中声卡的问题

发布时间:2012-04-11 22:21:29来源:红联作者:x8yuan
清华同方锋锐K483装的是debian6.0squeeze,系统装好后有音量图标 ,但是没声音,试着按网上的去弄到现在没结果,看到有个帖子说可以尝试使用“alsactl init”来配置声卡,运行后出现下面的结果
root@debian:/home/xiu# alsactl init
Unknown hardware: "HDA-Intel" "Intel ID 2805" "HDA:11068446,11060000,00100000 HDA:80862805,80860101,00100000" "0x8086" "0x7270"
Hardware is initialized using a guess method

这样的提示是不是因为没安装声卡驱动?
运行lspci后的结果如下
xiu@debian:~$ lspci
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5)
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation Cougar Point 4 port SATA IDE Controller (rev 05)
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
00:1f.5 IDE interface: Intel Corporation Cougar Point 2 port SATA IDE Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation Device 0df7 (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
文章评论

共有 1 条评论

  1. 于 2012-04-12 20:46:35发表:

    lsmod试试?看看声卡模块是否已经驱动?如果是的话就用root身份modprob snd-pcm-oss, 同时把snd-pcm-oss加入/etc/modules。
    如果没有驱动的话,或虽有驮运也做了以上动作无效,看看启动过程中是否向你要firmware,如是的话,找到它,安装它。多源里有现成的,少数也会有源码,编译 一下,然后放到/lib/firmware目录下。