求助，麻烦安装10.04的朋友将/etc/init.d/halt文件贴过来

共有 2 条评论

1. xiaoshi 于 2010-05-02 14:20:38发表:

   #! /bin/sh
   ### BEGIN INIT INFO
   # Provides: halt
   # Required-Start:
   # Required-Stop:
   # Default-Start:
   # Default-Stop: 0
   # Short-Description: Execute the halt command.
   # Description:
   ### END INIT INFO
   
   NETDOWN=yes
   
   PATH=/sbin:/usr/sbin:/bin:/usr/bin
   [ -f /etc/default/halt ] && . /etc/default/halt
   
   . /lib/lsb/init-functions
   
   do_stop () {
   if [ "$INIT_HALT" = "" ]
   then
   case "$HALT" in
   [Pp]*)
   INIT_HALT=POWEROFF
   ;;
   [Hh]*)
   INIT_HALT=HALT
   ;;
   *)
   INIT_HALT=POWEROFF
   ;;
   esac
   fi
   
   # See if we need to cut the power.
   if [ "$INIT_HALT" = "POWEROFF" ] && [ -x /etc/init.d/ups-monitor ]
   then
   /etc/init.d/ups-monitor poweroff
   fi
   
   # Don't shut down drives if we're using RAID.
   hddown="-h"
   if grep -qs '^md.*active' /proc/mdstat
   then
   hddown=""
   fi
   
   # If INIT_HALT=HALT don't poweroff.
   poweroff="-p"
   if [ "$INIT_HALT" = "HALT" ]
   then
   poweroff=""
   fi
   
   # Make it possible to not shut down network interfaces,
   # needed to use wake-on-lan
   netdown="-i"
   if [ "$NETDOWN" = "no" ]; then
   netdown=""
   fi
   
   log_action_msg "Will now halt"
   halt -d -f $netdown $poweroff $hddown
   }
   
   case "$1" in
   start)
   # No-op
   ;;
   restart|reload|force-reload)
   echo "Error: argument '$1' not supported" >&2
   exit 3
   ;;
   stop)
   do_stop
   ;;
   *)
   echo "Usage: $0 start|stop" >&2
   exit 3
   ;;
   esac
   
   :

2. sutao80216 于 2010-04-30 16:10:16发表:

   这个，你用livecd启动，自己去看看不就行啦！