求一份默认的opensuse11.1 默认的xorg.conf文件

共有 4 条评论

1. 67085241 于 2009-04-19 00:23:02发表:

   我终于知道了.suse里面你用root用户打yast出现配置界面,重新配置设定好图形卡与显示器然后reboot以后就可以了.

2. 67085241 于 2009-04-16 10:10:52发表:

   你肯定是装了suse以后，改显卡驱动的时候调动了xorg.conf，然后又没有备份，就进不了xwindows界面了。
   我也遇到这个问题了。无奈的只有重新安装。 rahat里面好像可以用setup来重新配置。不知道suse里面有米有等效这个的命令。

3. 1234qw 于 2009-04-13 19:24:05发表:

   # generic XFree86 4.x configuration file
   
   Section "Files"
   FontPath "/usr/share/fonts/truetype/"
   FontPath "/usr/share/fonts/uni/"
   FontPath "/usr/share/fonts/misc/"
   InputDevices "/dev/input/mice"
   EndSection
   
   Section "ServerFlags"
   Option "AllowMouseOpenFail"
   Option "BlankTime" "0"
   EndSection
   
   Section "Module"
   Load "dbe"
   Load "extmod"
   EndSection
   
   Section "InputDevice"
   Driver "kbd"
   Identifier "Keyboard[0]"
   Option "Protocol" "Standard"
   Option "XkbRules" "xfree86"
   Option "XkbKeycodes" "xfree86"
   Option "XkbModel" "pc104"
   Option "XkbLayout" "us"
   EndSection
   
   Section "InputDevice"
   Driver "mouse"
   Identifier "Mouse[1]"
   Option "Protocol" "explorerps/2"
   Option "Device" "/dev/input/mice"
   EndSection
   
   Section "Monitor"
   HorizSync 25-40
   Identifier "Monitor[0]"
   ModelName "Initial"
   VendorName "Initial"
   VertRefresh 47-75
   UseModes "Modes[0]"
   EndSection
   
   
   Section "Modes"
   Identifier "Modes[0]"
   Modeline "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
   Modeline "640x480" 31.5 640 656 720 840 480 481 484 500 # 6. Try
   Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 # 5. Try
   Modeline "640x480" 28 640 664 760 800 480 491 493 525 # 4. Try
   Modeline "640x480" 28.32 640 664 760 800 480 491 493 525 # 3. Try
   Modeline "640x480" 25.18 640 664 760 800 480 491 493 525 # 2. Try
   Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 1. Try
   EndSection
   
   Section "Monitor"
   HorizSync 28-33
   Identifier "Monitor[vmware]"
   ModelName "Initial"
   VendorName "Initial"
   VertRefresh 43-72
   UseModes "Modes[vmware]"
   EndSection
   
   Section "Modes"
   Identifier "Modes[vmware]"
   Modeline "800x600" 29.38 800 816 896 992 600 601 604 617
   EndSection
   
   Section "Monitor"
   HorizSync 31-48
   Identifier "Monitor[vesa]"
   ModelName "VESA"
   VendorName "VESA"
   VertRefresh 50-60
   EndSection
   
   # Screen Section for module X support
   # -------------------------------------
   Section "Screen"
   DefaultDepth 16
   SubSection "Display"
   Depth 16
   Modes "800x600"
   EndSubSection
   SubSection "Display"
   Depth 24
   Modes "800x600"
   EndSubSection
   SubSection "Display"
   Depth 32
   Modes "800x600"
   EndSubSection
   SubSection "Display"
   Depth 8
   Modes "800x600"
   EndSubSection
   Device "Device[0]"
   Identifier "Screen[0]"
   Monitor "Monitor[0]"
   EndSection
   
   # Screen Section for fbdev support
   # vesafb defaults to 16bit
   # others default to 8bit, force a higher colordepth
   # on Apple onboard controllers, remove the default #207338
   # changes for DefaultDepth have to be made in /usr/lib/YaST2/startup/YaST2.call as well
   # ----------------------------------
   Section "Screen"
   #@DefaultDepth@
   SubSection "Display"
   Depth 16
   Modes "default"
   EndSubSection
   SubSection "Display"
   Depth 15
   Modes "default"
   EndSubSection
   SubSection "Display"
   Depth 24
   Modes "default"
   EndSubSection
   SubSection "Display"
   Depth 32
   Modes "default"
   EndSubSection
   SubSection "Display"
   Depth 8
   Modes "default"
   EndSubSection
   Device "Device[fbdev]"
   Identifier "Screen[fbdev]"
   Monitor "Monitor[0]"
   EndSection
   
   # Screen Section for vesa support
   # ----------------------------------
   Section "Screen"
   SubSection "Display"
   Depth 16
   Modes "default"
   EndSubSection
   SubSection "Display"
   Depth 8
   Modes "default"
   EndSubSection
   Device "Device[vesa]"
   Identifier "Screen[vesa]"
   Monitor "Monitor[vesa]"
   EndSection
   
   # Screen Section for vmware support
   # ----------------------------------
   Section "Screen"
   SubSection "Display"
   Depth 8
   Modes "800x600"
   EndSubSection
   SubSection "Display"
   Depth 16
   Modes "800x600"
   EndSubSection
   SubSection "Display"
   Depth 24
   Modes "800x600"
   EndSubSection
   Device "Device[vmware]"
   Identifier "Screen[vmware]"
   Monitor "Monitor[vmware]"
   EndSection
   
   # Device Sections...
   # -------------------
   Section "Device"
   #BusID "1:0:0"
   Driver "ChangeMe"
   Identifier "Device[0]"
   # device_options
   Option "sw_cursor" "on"
   EndSection
   
   Section "Device"
   Driver "fbdev"
   Identifier "Device[fbdev]"
   # fbdev_options
   EndSection
   
   Section "Device"
   Driver "vesa"
   #Option "DefaultRefresh"
   Option "ModeSetClearScreen" "no"
   Identifier "Device[vesa]"
   EndSection
   
   Section "Device"
   Driver "vmware"
   Identifier "Device[vmware]"
   EndSection
   
   Section "ServerLayout"
   Identifier "Layout[all]"
   InputDevice "Keyboard[0]" "CoreKeyboard"
   InputDevice "Mouse[1]" "CorePointer"
   Option "Xinerama" "off"
   Screen "Screen[vesa]"
   EndSection

4. yashu 于 2009-04-13 16:24:34发表:

   没用opensuse11.1，帮不了