红联Linux门户
Linux帮助

启动信息有些错误请高手来指点

发布时间:2008-10-27 17:22:19来源:红联作者:jxw222
请大虾指点:红色部分为出错的地方,但我不知道出错的原因
Please press Enter to activate this console. cirrus_start: requesting interrupt 53

eth0: register interrupt 53 successfuly

Error -3 while decompressing!
c032bba4(-603116625)->c3449000(4096)

Error -3 while decompressing!

c0327753(144903922)->c344a000(4096)

/usr/etc/rc.local: line 8: /usr/sbin/makelinks: cannot execute binary file
Reading data from NAND FLASH without ECC is not recommended

ln: /dev/touchscreen/0: File exists
Could not open mime.types file, "etc/mime.types", for reading
mount: Mounting /dev/nfblock/3 on /tmp/flashdisk failed: No such file or directory
mount: Mounting /dev/nfblock/2 on /tmp/mplayer failed: No such file or directory
Reading data from NAND FLASH without ECC is not recommended

Reading data from NAND FLASH without ECC is not recommended

Reading data from NAND FLASH without ECC is not recommended

Reading data from NAND FLASH without ECC is not recommended

Can't open framebuffer device /dev/fb0en framebuffer device /dev/fb0
driver cannot connect


Please press Enter to activate this console.
文章评论

共有 3 条评论

  1. jxw222 于 2008-10-30 17:49:41发表:

    在编译内核时我已经把帧缓冲设备的驱动选中了。

  2. wangdu2002 于 2008-10-27 21:49:38发表:

    好象是不能打开帧缓冲设备,驱动不能连接,这可能是内核编译时没把帧缓冲设备的驱动选中.

  3. nutra 于 2008-10-27 18:19:11发表:

    上面说按回车修复什么