在虚拟中装了红旗桌面6.0版，装VM Tools时发现了问题，谁能帮着解答一下
1.网上搜的结果：
Installing the content of the package.
# 安装过程的画面，全部使用默认值，一直按 Enter 就对了
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/rc.d]
What is the directory that contains the init scripts?
[/etc/rc.d/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
Thepath "/usr/lib/vmware-tools" does not exist currently. This programisgoingto create it, including needed parent directories. Is thiswhatyou want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
Thepath "/usr/share/doc/vmware-tools" does not exist currently.Thisprogram isgoing to create it, including needed parent directories.Isthis what you want?
[yes]
The installation of VMware Tools 5.5.1 build-19175 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [ 确定 ]
Trying to find a suitable vmhgfs module for your running kernel.
The module bld-2.6.9-5.EL-i686-RHEL4 loads perfectly in the running kernel.
pcnet32 30153 0
Unloading pcnet32 module
Trying to find a suitable vmxnet module for your running kernel.
The module bld-2.6.9-5.EL-i686-RHEL4 loads perfectly in the running kernel.
Detected X.org version 6.8.
关闭控制台鼠标服务： [ 确定 ]
启动控制台鼠标服务： [ 确定 ]
Please choose one of the following display sizes (1 - 13):
# 显示分辨率，这里是以 1024x768 为例
# VMware Tools 安装的时候，会自动修改 X server 的配置文件
[1] "640x480"
[2]< "800x600"
[3] "1024x768"
[4] "1152x864"
[5] "1280x800"
[6] "1152x900"
[7] "1280x1024"
[8] "1376x1032"
[9] "1400x1050"
[10] "1680x1050"
[11] "1600x1200"
[12] "1920x1200"
[13] "2364x1773"
Please enter a number between 1 and 13:
[2] 3
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.9-34.EL i686 [ELF]
Current Operating System: Linux rd01.domain 2.6.9-34.EL #1 Wed Mar 8 00:07:35 CST 2006 i686
Build Date: 04 May 2006
Build Host: x8664-build.centos.org
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OSKernel: Linux version 2.6.9-34.EL (buildcentos@build-i386) (gccversion3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Wed Mar 8 00:07:35 CST 2006P
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/tmp/vmware-config0/XF86ConfigLog.3131", Time: Mon Jun 12 20:57:34 2006
(++) Using config file: "/tmp/vmware-config0/XF86Config.3131"
(WW) VMWARE(0): Failed to set up write-combining range (0xf0000000,0x1000000)
X is running fine with the new config file.
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: [ 确定 ]
Guest filesystem driver: [ 确定 ]
DMA setup: [ 确定 ]
Guest operating system daemon: [ 确定 ]
The configuration of VMware Tools 5.5.1 build-19175 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an XFree86 session.
To use the vmxnet driver, restart networking using the following commands:
/etc/init.d/network stop
rmmod pcnet32
rmmod vmxnet
depmod -a
modprobe vmxnet
/etc/init.d/network start
Enjoy,
--the VMware team
2.我自己安装的情况
Creating a new installer database using the tar3 format.
Installing the content of the package.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/rc.d]
What is the directory that contains the init scripts?
[/etc/rc.d/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 5.5.3 build-34685 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [确定]
Trying to find a suitable vmhgfs module for your running kernel.
None of the pre-built vmhgfs modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmhgfs module for
your system (you need to have a C compiler installed on your system)? [yes]
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.22.6-1/build/include]
Extracting the sources of the vmhgfs module.
Building the vmhgfs module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmhgfs-only'
make -C /lib/modules/2.6.22.6-1/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. mod
ules
make[1]: Entering directory `/usr/src/kernels/2.6.22.6-1-i686'
CC [M] /tmp/vmware-config0/vmhgfs-only/cpName.o
CC [M] /tmp/vmware-config0/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/vmware-config0/vmhgfs-only/dev.o
CC [M] /tmp/vmware-config0/vmhgfs-only/driver.o
CC [M] /tmp/vmware-config0/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/vmware-config0/vmhgfs-only/main.o
CC [M] /tmp/vmware-config0/vmhgfs-only/staticEscape.o
LD [M] /tmp/vmware-config0/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config0/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/vmware-config0/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.22.6-1-i686'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory `/tmp/vmware-config0/vmhgfs-only'
The module loads perfectly in the running kernel.
pcnet32 31092 0
Unloading pcnet32 module
Extracting the sources of the vmxnet module.
Building the vmxnet module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmxnet-only'
make -C /lib/modules/2.6.22.6-1/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. mod
ules
make[1]: Entering directory `/usr/src/kernels/2.6.22.6-1-i686'
CC [M] /tmp/vmware-config0/vmxnet-only/vmxnet.o
/tmp/vmware-config0/vmxnet-only/vmxnet.c: In function ‘vmxnet_open’:
/tmp/vmware-config0/vmxnet-only/vmxnet.c:674: warning: ‘deprecated_irq_flag’ is
deprecated (declared at include/linux/interrupt.h:66)
/tmp/vmware-config0/vmxnet-only/vmxnet.c: In function ‘vmxnet_netpoll’:
/tmp/vmware-config0/vmxnet-only/vmxnet.c:1058: error: too many arguments to func
tion ‘vmxnet_interrupt’
make[2]: *** [/tmp/vmware-config0/vmxnet-only/vmxnet.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config0/vmxnet-only] 错误 2
make[1]: Leaving directory `/usr/src/kernels/2.6.22.6-1-i686'
make: *** [vmxnet.ko] 错误 2
make: Leaving directory `/tmp/vmware-config0/vmxnet-only'
Unable to build the vmxnet module.
The fast network device driver (vmxnet module) is used only for our fast
networking interface. The rest of the software provided by VMware Tools is
designed to work independently of this feature.
If you wish to have the fast network driver enabled, you can install the driver
by running vmware-config-tools.pl again after making sure that gcc, binutils,
make and the kernel sources for your running kernel are installed on your
machine. These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Detected X.org version 1.3.
No drivers for X.org version: 1.3.
Please choose one of the following display sizes (1 - 13):
[1] "640x480"
[2]< "800x600"
[3] "1024x768"
[4] "1152x864"
[5] "1280x800"
[6] "1152x900"
[7] "1280x1024"
[8] "1376x1032"
[9] "1400x1050"
[10] "1680x1050"
[11] "1600x1200"
[12] "1920x1200"
[13] "2364x1773"
Please enter a number between 1 and 13:
[2] 3
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: [确定]
Guest filesystem driver: [确定]
DMA setup: [确定]
Guest operating system daemon: [确定]
The configuration of VMware Tools 5.5.3 build-34685 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an XFree86 session.
Enjoy,
--the VMware team
发现并没有X－window配置的这部分
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.9-34.EL i686 [ELF]
Current Operating System: Linux rd01.domain 2.6.9-34.EL #1 Wed Mar 8 00:07:35 CST 2006 i686
Build Date: 04 May 2006
Build Host: x8664-build.centos.org
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OSKernel: Linux version 2.6.9-34.EL (buildcentos@build-i386) (gccversion3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Wed Mar 8 00:07:35 CST 2006P
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/tmp/vmware-config0/XF86ConfigLog.3131", Time: Mon Jun 12 20:57:34 2006
(++) Using config file: "/tmp/vmware-config0/XF86Config.3131"
(WW) VMWARE(0): Failed to set up write-combining range (0xf0000000,0x1000000)
X is running fine with the new config file.
请教高手！
