查了下。在红旗里有三条命令
adsl-setup
adsl-start
adsl-stop
第一条是设置的指令，但我输入以后其中出现了下面这种英文提示，搞不懂是做什么的，请高手指点一下。……^-^ 这下面两处要输入什么东西啊。
Enter the Ethernet interface connected to the adsl modem For Solaris,this is likely to be something like /dev/hme0.
For linux, it will be ethx, whore X is a number。
（default eth0）:
Do you want the link to come up on decand ,or stay up continuously? if you want it to come up on demand, enter the idle in seconds after which the link should be dropped. if you want the link to stay up permanently, enter no (two letters, lower-case)
NOTE:Demand-activated links do not interact well with dynamic IP addresses, you may have some problems with demand-activated links.
Enter the demand value (default no):
MCU老鼠 于 2008-08-27 10:27:42发表:
搞定了，谢谢两位，直接在桌面上进网络配置就行了。。和和
MCU老鼠 于 2008-08-26 22:23:46发表:
那好。。我再进去配置下看。。谢谢了。
zhy0123789 于 2008-08-26 22:13:33发表:
我的网络配置就在桌面上，这个是默认的吧，图形界面比较方便直观
Songs 于 2008-08-26 22:12:35发表:
用图形来配置吧，在控制中心的网络配置，会出来个配置界面的