搞了半天,发现用操作系统在上网连接上是与ADSL作对.
我的网卡和账号是没半点问题,在windowxp和ubunutu上可正常使用,无须考虑电信公司是否强迫客户使用它的星空极速软件. 在红旗6上呢,乱敲进IP地址,以局域网方式测试,
能发送和接收文件包,自然是不能 上网的. 我用adsl-setup设置,都是根据很多网站的教程的,账号与密码已用过无数遍,绝对无半点差错,可是无法接通,根据任务管理器显示一点信号也不能发出去,更别说认证了.以下是一个设置过程,希望有人可告知我问题的所在.
root@localhost ~]# adsl-setup
Welcome to the ADSL client setup. First, I will run some checks on
your system to make sure the PPPoE client is installed properly...
LOGIN NAME
Enter your Login Name (default root): **dsl 027837**@163.gd
INTERFACE
Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0):
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no):
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here:
PASSWORD
Please enter your Password:
Please re-enter your Password:
Sorry, the passwords do not match. Try again? (y/n)
PASSWORD
Please enter your Password:
Please re-enter your Password:
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes):
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
Choose a type of firewall (0-2): 2
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):
** Summary of what you entered **
Ethernet Interface: eth0
User name: **dsl 027837**@163.gd
Activate-on-demand: No
DNS: Do not adjust
Firewalling: MASQUERADE
User Control: yes
Accept these settings and adjust configuration files (y/n)?
Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
(But first backing it up to /etc/ppp/chap-secrets.bak)
(But first backing it up to /etc/ppp/pap-secrets.bak)
Congratulations, it should be all set up!
Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status.
[root@localhost ~]# /sbin/ifup ppp0
ifcfg-ppp0: line 20: 027****@163.gd: command not found
ifcfg-ppp0: line 20: 027****@163.gd: command not found
ifcfg-ppp0: line 20: 027****@163.gd: command not found
/etc/sysconfig/network-scripts/ifcfg-ppp0: line 20: 027****@163.gd: command not found
/sbin/ifdown ppp0
[root@localhost ~]# /sbin/ifdown ppp0
ifcfg-ppp0: line 20: 027****@163.gd: command not found
ifcfg-ppp0: line 20: 027****@163.gd: command not found
/etc/sysconfig/network-scripts/ifcfg-ppp0: line 20: 027****@163.gd: command not found
[root@localhost ~]# adsl-start
/etc/sysconfig/network-scripts/ifcfg-ppp0: line 20: 027****@163.gd: command not found
[root@localhost ~]# adslstart
bash: adslstart: command not found
[
[root@localhost ~]# /sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0
/etc/sysconfig/network-scripts/ifcfg-ppp0: line 20: 027****@163.gd: command not found
adsl-status: Link is down (can't read pppoe PID file /var/run/pppoe-adsl.pid.pppoe)
[root@localhost ~]# adsl-connect
/etc/sysconfig/network-scripts/ifcfg-ppp0: line 20: 027****@163.gd: command not found
/usr/sbin/adsl-connect: Check '/etc/sysconfig/network-scripts/ifcfg-ppp0' -- no setting for USER
[root@localhost ~]#
