引入：
在Windows下经常使用超级终端来调试交换机、路由器，现在我的日常所用系统为Arch，为了让自己在Linux环境下也可以使用类似超级终端的程序，我进行了如下
有两种软件可用：
第一种：minicom
安装
$ sudo pacman -S minicom
配置Minicom［必须通过超级用户来修改］
$ sudo minicom -s
在如下界面中：选取“Serial port setup ”
+-----[configuration]------+
| Filenames and paths |
| File transfer protocols |
| Serial port setup|
| Modem and dialing|
| Screen and keyboard |
| Save setup as dfl|
| Save setup as.. |
| Exit |
| Exit from Minicom|
+--------------------------+
配置结果如下：
+-----------------------------------------------------------------------+
| A -Serial Device : /dev/ttyS0|
| B - Lockfile Location : /var/lock |
| C - Callin Program : |
| D - Callout Program : |
| E -Bps/Par/Bits : 9600 8N1 |
| F - Hardware Flow Control : No|
| G - Software Flow Control : No|
| |
|Change which setting? |
+-----------------------------------------------------------------------+
注意：minicom一定要正常退出，否则会驻留在一定消耗CPU。
第二种：xgcom
[www @linux ~]$ yaourt -S xgcom
==> Downloading xgcom PKGBUILD from AUR...
x PKGBUILD
First Submitted: Tue, 01 Sep 2009 15:51:31 +0000
xgcom 0.04-1
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> xgcom dependencies:
- make (already installed)
- autoconf (already installed)
- automake (already installed)
- glib2 (already installed)
- vte (already installed)
- gtk2 (already installed)
- subversion (package found)
==> Continue building xgcom ? [Y/n]
==> -------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for xgcom:
正在解决依赖关系...
正在查找内部冲突...
目标 (5)： apr-1.4.6-1 apr-util-1.4.1-1 neon-0.29.6-4 unixodbc-2.3.1-1
subversion-1.7.5-2
全部下载大小：5.86 MiB
全部安装大小：30.02 MiB
进行安装吗？ [Y/n] y
:: 正在从 extra 软件库获取软件包...
neon-0.29.6-4-i686 179.0 KiB 64.5K/s 00:03 [######################] 100%
apr-1.4.6-1-i686 273.6 KiB 75.9K/s 00:04 [######################] 100%
unixodbc-2.3.1-1-i686196.1 KiB 49.1K/s 00:04 [######################] 100%
apr-util-1.4.1-1-i686169.2 KiB 47.4K/s 00:04 [######################] 100%
错误：无法从 mirrors.163.com : Operation too slow. Less than 1024 bytes/sec transferred the last 10 seconds 获取文件 'subversion-1.7.5-2-i686.pkg.tar.xz'
错误：无法从 mirrors.163.com : Connection time-out 获取文件 'subversion-1.7.5-2-i686.pkg.tar.xz'
subversion-1.7.5-2-i6865.1 MiB 36.7K/s 02:21 [######################] 100%
(5/5) 正在检查软件包完整性 [######################] 100%
(5/5) 正在加载软件包文件 [######################] 100%
(5/5) 正在检查文件冲突 [######################] 100%
(5/5) 正在检查可用硬盘空间 [######################] 100%
(1/5) 正在安装 neon[######################] 100%
(2/5) 正在安装 apr [######################] 100%
(3/5) 正在安装 unixodbc[######################] 100%
(4/5) 正在安装 apr-util[######################] 100%
(5/5) 正在安装 subversion [######################] 100%
subversion 的可选依赖
libgnome-keyring
kdeutils-kwallet
bash-completion: for svn bash completion
python2: for some hook scripts
==> 正在创建软件包：xgcom 0.04-1 (2012年 06月 20日 星期三 17:07:01 CST)
==> 正在检查运行时依赖关系...
==> 正在检查编译时依赖关系
==> 获取源代码...
-> 正在下载 xgcom.0.04.tar.gz...
% Total% Received % Xferd Average Speed TimeTime Time Current
Dload Upload Total SpentLeft Speed
100 289k 100 289k0 0 48710 0 0:00:06 0:00:06 --:--:-- 55164
==> 正在验证源代码文件 md5sums...
xgcom.0.04.tar.gz ... 通过
==> 解压缩源码...
-> 正在解压缩 xgcom.0.04.tar.gz，使用 bsdtar
==> 正在进入 fakeroot 环境...
==> 正在开始 build()...
**Warning**: I am going to run `configure' with no arguments.
If you wish to pass any to it, please specify them on the
`./autogen.sh' command line.
processing .
Creating ./aclocal.m4 ...
Running glib-gettextize... Ignore non-fatal messages.
Copying file mkinstalldirs
Copying file po/Makefile.in.in
Please add the files
codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4
from the /aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
Making ./aclocal.m4 writable ...
Running aclocal ...
Running autoheader...
Running automake --gnu ...
configure.in:4: installing './install-sh'
configure.in:4: installing './missing'
Makefile.am: installing './INSTALL'
src/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --enable-maintainer-mode ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for library containing strerror... none required
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for PACKAGE... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating po/Makefile.in
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
Now type `make' to compile.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for library containing strerror... none required
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for PACKAGE... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating po/Makefile.in
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing default-1 commands
make all-recursive
make[1]: 进入目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04”
Making all in src
make[2]: 进入目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04/src”
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c
mv -f .deps/main.Tpo .deps/main.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT support.o -MD -MP -MF .deps/support.Tpo -c -o support.o support.c
mv -f .deps/support.Tpo .deps/support.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT MainWindow.o -MD -MP -MF .deps/MainWindow.Tpo -c -o MainWindow.o MainWindow.c
MainWindow.c: 在函数‘create_Xgcom’中:
MainWindow.c:66:3: 警告：不建议使用‘gdk_pixbuf_unref’(声明于 /usr/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf-core.h:243)：Use 'g_object_unref' instead [-Wdeprecated-declarations]
mv -f .deps/MainWindow.Tpo .deps/MainWindow.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT FootFace.o -MD -MP -MF .deps/FootFace.Tpo -c -o FootFace.o FootFace.c
mv -f .deps/FootFace.Tpo .deps/FootFace.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT MenuFace.o -MD -MP -MF .deps/MenuFace.Tpo -c -o MenuFace.o MenuFace.c
mv -f .deps/MenuFace.Tpo .deps/MenuFace.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT MenuCall.o -MD -MP -MF .deps/MenuCall.Tpo -c -o MenuCall.o MenuCall.c
mv -f .deps/MenuCall.Tpo .deps/MenuCall.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT RightVboxFace.o -MD -MP -MF .deps/RightVboxFace.Tpo -c -o RightVboxFace.o RightVboxFace.c
mv -f .deps/RightVboxFace.Tpo .deps/RightVboxFace.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT LeftVboxFace.o -MD -MP -MF .deps/LeftVboxFace.Tpo -c -o LeftVboxFace.o LeftVboxFace.c
mv -f .deps/LeftVboxFace.Tpo .deps/LeftVboxFace.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT LeftVboxCall.o -MD -MP -MF .deps/LeftVboxCall.Tpo -c -o LeftVboxCall.o LeftVboxCall.c
mv -f .deps/LeftVboxCall.Tpo .deps/LeftVboxCall.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT About.o -MD -MP -MF .deps/About.Tpo -c -o About.o About.c
About.c: 在函数‘create_about_xcomtool’中:
About.c:46:3: 警告：不建议使用‘gdk_pixbuf_unref’(声明于 /usr/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf-core.h:243)：Use 'g_object_unref' instead [-Wdeprecated-declarations]
About.c: 在文件作用域：
cc1: 警告：未知的转义序列：‘\302’ [默认启用]
mv -f .deps/About.Tpo .deps/About.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT CfgFace.o -MD -MP -MF .deps/CfgFace.Tpo -c -o CfgFace.o CfgFace.c
CfgFace.c: 在函数‘create_configuration_dialog’中:
CfgFace.c:97:3: 警告：不建议使用‘gdk_pixbuf_unref’(声明于 /usr/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf-core.h:243)：Use 'g_object_unref' instead [-Wdeprecated-declarations]
mv -f .deps/CfgFace.Tpo .deps/CfgFace.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT Serie.o -MD -MP -MF .deps/Serie.Tpo -c -o Serie.o Serie.c
mv -f .deps/Serie.Tpo .deps/Serie.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT SendFile.o -MD -MP -MF .deps/SendFile.Tpo -c -o SendFile.o SendFile.c
mv -f .deps/SendFile.Tpo .deps/SendFile.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/vte-0.0 -I/usr/include/gio-unix-2.0/ -O2 -MT Funs.o -MD -MP -MF .deps/Funs.Tpo -c -o Funs.o Funs.c
mv -f .deps/Funs.Tpo .deps/Funs.Po
gcc -O2 -Wl,-O1,--sort-common,--as-needed,-z,relro -o xgcom main.o support.o MainWindow.o FootFace.o MenuFace.o MenuCall.o RightVboxFace.o LeftVboxFace.o LeftVboxCall.o About.o CfgFace.o Serie.o SendFile.o Funs.o -lvte -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lpango-1.0 -lfreetype -lfontconfig -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lcairo -lX11
make[2]: 离开目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04/src”
Making all in po
make[2]: 进入目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04/po”
make[2]: 对“all”无需做任何事。
make[2]: 离开目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04/po”
make[2]: 进入目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04”
make[2]: 离开目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04”
make[1]: 离开目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04”
Making install in src
make[1]: 进入目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04/src”
make[2]: 进入目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04/src”
/bin/mkdir -p '/tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/bin'
/usr/bin/install -c xgcom '/tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/bin'
make[2]: 对“install-data-am”无需做任何事。
make[2]: 离开目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04/src”
make[1]: 离开目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04/src”
Making install in po
make[1]: 进入目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04/po”
if test -r ".././mkinstalldirs"; then \
.././mkinstalldirs /tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/share; \
else \
/bin/sh ../mkinstalldirs /tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/share; \
fi
mkdir -p -- /tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/share
if test "xcomtool" = "glib"; then \
if test -r ".././mkinstalldirs"; then \
.././mkinstalldirs /tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/share/glib-2.0/gettext/po; \
else \
/bin/sh ../mkinstalldirs /tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/share/glib-2.0/gettext/po; \
fi; \
/usr/bin/install -c -m 644 ./Makefile.in.in \
/tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/share/glib-2.0/gettext/po/Makefile.in.in; \
else \
: ; \
fi
make[1]: 离开目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04/po”
make[1]: 进入目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04”
make[2]: 进入目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04”
make[2]: 对“install-exec-am”无需做任何事。
if test -d ./pixmaps; then \
/bin/sh ./mkinstalldirs /tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/share/xcomtool/pixmaps; \
for pixmap in ./pixmaps/*; do \
if test -f $pixmap; then \
/usr/bin/install -c -m 644 $pixmap /tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/share/xcomtool/pixmaps; \
fi \
done \
fi
mkdir -p -- /tmp/yaourt-tmp-shenzhi/aur-xgcom/pkg//usr/share/xcomtool/pixmaps
make[2]: 离开目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04”
make[1]: 离开目录“/tmp/yaourt-tmp-shenzhi/aur-xgcom/src/xgcom.0.04”
==> 正在清理安装...
-> 正在清除不打算要的文件...
-> 正在压缩 man 及 info 文档...
-> 正在从二进制文件和库中清除不需要的系统符号...
==> 正在创建软件包...
-> 正在生成 .PKGINFO 文件...
-> 正在压缩软件包...
==> 正在离开 fakeroot 环境。
==> 完成创建：xgcom 0.04-1 (2012年 06月 20日 星期三 17:07:27 CST)
==> Continue installing xgcom ? [Y/n]
==> [v]iew package contents [c]heck package with namcap
==> ---------------------------------------------------
==> y
正在加载软件包...
正在解决依赖关系...
正在查找内部冲突...
目标 (1)： xgcom-0.04-1
全部安装大小：0.12 MiB
进行安装吗？ [Y/n] y
(1/1) 正在检查软件包完整性 [######################] 100%
(1/1) 正在加载软件包文件 [######################] 100%
(1/1) 正在检查文件冲突 [######################] 100%
(1/1) 正在检查可用硬盘空间 [######################] 100%
(1/1) 正在安装 xgcom [######################] 100%
==> Packages no longer required by any installed package:
subversion
[www @linux ~]$ sudo chmod 666 /dev/ttyS0
[www @linux ~]$