OpenWrt默认不支持极路由。
在参考了rssnsj的代码后，结合官方源码，整理出一个patch，通过Git apply打上补丁之后，就可以编译了。
补丁内容如下：
From 1b3f52edbc4e68f080d119c0e2bbe8d2cb339de3 Mon Sep 17 00:00:00 2001
From: Sid <xxx@xxx.com>
Date: Fri, 27 Jan 2017 00:41:52 +0800
Subject: [PATCH] support hc5x61
---
target/linux/ramips/base-files/etc/board.d/01_leds | 23 ++++
.../linux/ramips/base-files/etc/board.d/02_network | 9 ++
target/linux/ramips/base-files/etc/diag.sh | 12 ++
target/linux/ramips/base-files/lib/ramips.sh | 12 ++
.../ramips/base-files/lib/upgrade/platform.sh | 2 +
target/linux/ramips/dts/HC5661.dts | 32 +++++
target/linux/ramips/dts/HC5661A.dts | 78 ++++++++++++
target/linux/ramips/dts/HC5761.dts | 32 +++++
target/linux/ramips/dts/HC5861.dts | 92 ++++++++++++++
target/linux/ramips/dts/HC5XXX.dtsi | 141 +++++++++++++++++++++
target/linux/ramips/image/Makefile | 8 ++
target/linux/ramips/mt7620/profiles/hiwifi.mk | 47 +++++++
target/linux/ramips/mt7628/profiles/hiwifi.mk | 19 +++
13 files changed, 507 insertions(+)
create mode 100644 target/linux/ramips/dts/HC5661.dts
create mode 100644 target/linux/ramips/dts/HC5661A.dts
create mode 100644 target/linux/ramips/dts/HC5761.dts
create mode 100644 target/linux/ramips/dts/HC5861.dts
create mode 100644 target/linux/ramips/dts/HC5XXX.dtsi
create mode 100644 target/linux/ramips/mt7620/profiles/hiwifi.mk
create mode 100644 target/linux/ramips/mt7628/profiles/hiwifi.mk
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 5327d00..a85ceec 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -247,6 +247,29 @@ case $board in
set_usb_led "wr8305rt:usb"
set_wifi_led "wr8305rt:wifi"
;;
+ hc5661)
+ ucidef_set_led_default "system" "system" "hc5661:blue:system" "1"
+ ucidef_set_led_netdev "internet" "internet" "hc5661:blue:internet" "eth0.2"
+ set_wifi_led "hc5661:blue:wlan2g"
+ ;;
+ hc5761)
+ ucidef_set_led_default "system" "system" "hc5761:blue:system" "1"
+ ucidef_set_led_netdev "internet" "internet" "hc5761:blue:internet" "eth0.2"
+ set_wifi_led "hc5761:blue:wlan2g"
+ ucidef_set_led_netdev "wifi5g" "wifi5g" "hc5761:blue:wlan5g" "rai0"
+ ;;
+ hc5861)
+ ucidef_set_led_default "system" "system" "hc5861:blue:system" "1"
+ ucidef_set_led_netdev "internet" "internet" "hc5861:blue:internet" "eth0.2"
+ set_wifi_led "hc5861:blue:wlan2g"
+ ucidef_set_led_netdev "wifi5g" "wifi5g" "hc5861:blue:wlan5g" "rai0"
+ ucidef_set_led_default "turbo" "turbo" "hc5861:blue:turbo" "0"
+ ;;
+ hc5661a)
+ ucidef_set_led_default "system" "system" "hc5661a:blue:system" "1"
+ ucidef_set_led_netdev "internet" "internet" "hc5661a:blue:internet" "eth0.2"
+ set_wifi_led "hc5661a:blue:wlan2g"
+ ;;
wt1520)
set_wifi_led "rt2800pci-phy0::radio"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index a78912d..c14f42b 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -242,6 +242,8 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "4 6t"
;;
+ hc5*61 | \
+ hc5661a | \
y1s)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
@@ -292,6 +294,13 @@ ramips_setup_macs()
wan_mac=$(mtd_get_mac_binary devdata 7)
;;
+ hc5*61 |\
+ hc5661a)
+ lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
+ [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+
w306r-v20)
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 5)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 6474ebd..3c4f5bd 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -72,6 +72,18 @@ get_status_led() {
fonera20n)
status_led="fonera20n:green:power"
;;
+ hc5661)
+ status_led="hc5661:blue:system"
+ ;;
+ hc5761)
+ status_led="hc5761:blue:system"
+ ;;
+ hc5861)
+ status_led="hc5861:blue:system"
+ ;;
+ hc5661a)
+ status_led="hc5661a:blue:system"
+ ;;
ip2202)
status_led="ip2202:green:run"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 8dc05b0..9a971ef 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -172,6 +172,18 @@ ramips_board_detect() {
*"Hauppauge Broadway")
name="broadway"
;;
+ *"HC5661")
+ name="hc5661"
+ ;;
+ *"HC5761")
+ name="hc5761"
+ ;;
+ *"HC5861")
+ name="hc5861"
+ ;;
+ *"HC5661A")
+ name="hc5661a"
+ ;;
*"Huawei D105")
name="d105"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index a3d0175..3d08a7b 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -57,6 +57,8 @@ platform_check_image() {
firewrt |\
pbr-m1 |\
hg255d | \
+ hc5*61 | \
+ hc5661a | \
hlk-rm04 | \
ht-tm02 | \
hw550-3g | \
diff --git a/target/linux/ramips/dts/HC5661.dts b/target/linux/ramips/dts/HC5661.dts
new file mode 100644
index 0000000..b9a717b
--- /dev/null
+++ b/target/linux/ramips/dts/HC5661.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+/include/ "HC5XXX.dtsi"
+
+/ {
+ compatible = "HC5661", "ralink,mt7620a-soc";
+ model = "HiWiFi HC5661";
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "hc5661:blue:system";
+ gpios = <&gpio0 9 1>;
+ };
+
+ internet {
+ label = "hc5661:blue:internet";
+ gpios = <&gpio0 11 1>;
+ };
+
+ wlan2g {
+ label = "hc5661:blue:wlan2g";
+ gpios = <&gpio3 0 1>;
+ };
+
+ wlan5g {
+ label = "hc5661:blue:wlan5g";
+ gpios = <&gpio0 7 1>;
+ };
+ };
+};
diff --git a/target/linux/ramips/dts/HC5661A.dts b/target/linux/ramips/dts/HC5661A.dts
new file mode 100644
index 0000000..afc3244
--- /dev/null
+++ b/target/linux/ramips/dts/HC5661A.dts
@@ -0,0 +1,78 @@
+/dts-v1/;
+
+/include/ "mt7628an.dtsi"
+
+/ {
+ compatible = "HC5661A", "mediatek,mt7628an-soc";
+ model = "HiWiFi HC5661A";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ palmbus@10000000 {
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@fd0000 {
+ label = "hwf_config";
+ reg = <0xfd0000 0x10000>;
+ };
+
+ bdinfo: partition@fe0000 {
+ label = "bdinfo";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ partition@ff0000 {
+ label = "backup";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+ };
+};
diff --git a/target/linux/ramips/dts/HC5761.dts b/target/linux/ramips/dts/HC5761.dts
new file mode 100644
index 0000000..a10904c
--- /dev/null
+++ b/target/linux/ramips/dts/HC5761.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+/include/ "HC5XXX.dtsi"
+
+/ {
+ compatible = "HC5761", "ralink,mt7620a-soc";
+ model = "HiWiFi HC5761";
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "hc5761:blue:system";
+ gpios = <&gpio0 9 1>;
+ };
+
+ internet {
+ label = "hc5761:blue:internet";
+ gpios = <&gpio0 11 1>;
+ };
+
+ wlan2g {
+ label = "hc5761:blue:wlan2g";
+ gpios = <&gpio3 0 1>;
+ };
+
+ wlan5g {
+ label = "hc5761:blue:wlan5g";
+ gpios = <&gpio0 7 1>;
+ };
+ };
+};
diff --git a/target/linux/ramips/dts/HC5861.dts b/target/linux/ramips/dts/HC5861.dts
new file mode 100644
index 0000000..05857ea
--- /dev/null
+++ b/target/linux/ramips/dts/HC5861.dts
@@ -0,0 +1,92 @@
+/dts-v1/;
+
+/include/ "HC5XXX.dtsi"
+
+/ {
+ compatible = "HC5861", "ralink,mt7620a-soc";
+ model = "HiWiFi HC5861";
+
+ ethernet@10100000 {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ ralink,port-map = "wllll";
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+ };
+
+ gsw@10110000 {
+ ralink,port4 = "gmac";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "hc5861:blue:system";
+ gpios = <&gpio0 9 1>;
+ };
+
+ wlan2g {
+ label = "hc5861:blue:wlan2g";
+ gpios = <&gpio0 11 1>;
+ };
+
+ internet {
+ label = "hc5861:blue:internet";
+ gpios = <&gpio3 0 1>;
+ };
+
+ wlan5g {
+ label = "hc5861:blue:wlan5g";
+ gpios = <&gpio0 7 1>;
+ };
+
+ turbo {
+ label = "hc5861:blue:turbo";
+ gpios = <&gpio0 10 1>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 13 0>;
+ };
+
+ sdpower {
+ gpio-export,name = "sdpower";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 8 0>;
+ };
+ };
+};
diff --git a/target/linux/ramips/dts/HC5XXX.dtsi b/target/linux/ramips/dts/HC5XXX.dtsi
new file mode 100644
index 0000000..d295fd9
--- /dev/null
+++ b/target/linux/ramips/dts/HC5XXX.dtsi
@@ -0,0 +1,141 @@
+/include/ "mt7620a.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus@10000000 {
+ sysc@0 {
+ ralink,gpiomux = "i2c", "jtag";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ gpio3: gpio@688 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@fd0000 {
+ label = "hwf_config";
+ reg = <0xfd0000 0x10000>;
+ };
+
+ bdinfo: partition@fe0000 {
+ label = "bdinfo";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ partition@ff0000 {
+ label = "backup";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ ethernet@10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+ };
+
+ sdhci@10130000 {
+ status = "okay";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pcie@10140000 {
+ status = "okay";
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
+ };
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 13 0>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index c4f4028..4e311ee 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -900,6 +900,10 @@ Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l
na930_mtd_size=20971520
Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
+Image/Build/Profile/HC5661=$(call BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661)
+Image/Build/Profile/HC5761=$(call BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761)
+Image/Build/Profile/HC5861=$(call BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861)
+Image/Build/Profile/HC5661A=$(call BuildFirmware/Default16M/$(1),$(1),hc5661a,HC5661A)
Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1)
Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S)
Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
@@ -933,6 +937,10 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WHR600D,$(1))
$(call Image/Build/Profile/WHR1166D,$(1))
$(call Image/Build/Profile/MZK-750DHP,$(1))
+ $(call Image/Build/Profile/HC5661,$(1))
+ $(call Image/Build/Profile/HC5761,$(1))
+ $(call Image/Build/Profile/HC5861,$(1))
+ $(call Image/Build/Profile/HC5661A,$(1))
$(call Image/Build/Profile/NA930,$(1))
$(call Image/Build/Profile/Y1,$(1))
$(call Image/Build/Profile/Y1S,$(1))
diff --git a/target/linux/ramips/mt7620/profiles/hiwifi.mk b/target/linux/ramips/mt7620/profiles/hiwifi.mk
new file mode 100644
index 0000000..c93f558
--- /dev/null
+++ b/target/linux/ramips/mt7620/profiles/hiwifi.mk
@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/HC5661
+ NAME:=HiWiFi HC5661
+ PACKAGES:=\
+ kmod-usb-core kmod-usb-dwc2 kmod-usb2 \
+ kmod-mmc-spi kmod-sdhci kmod-sdhci-mt7620 \
+ kmod-ledtrig-usbdev
+endef
+
+define Profile/HC5661/Description
+ Support HiWiFi HC5661 model(J1S)
+endef
+$(eval $(call Profile,HC5661))
+
+
+define Profile/HC5761
+ NAME:=HiWiFi HC5761
+ PACKAGES:=\
+ kmod-usb-core kmod-usb-dwc2 kmod-usb2 \
+ kmod-mmc-spi kmod-sdhci kmod-sdhci-mt7620 \
+ kmod-ledtrig-usbdev
+endef
+
+define Profile/HC5761/Description
+ Support HiWiFi HC5761 model(J2)
+endef
+$(eval $(call Profile,HC5761))
+
+
+define Profile/HC5861
+ NAME:=HiWiFi HC5861
+ PACKAGES:=\
+ kmod-usb-core kmod-usb-dwc2 kmod-usb2 \
+ kmod-mmc-spi kmod-sdhci kmod-sdhci-mt7620 \
+ kmod-ledtrig-usbdev
+endef
+
+define Profile/HC5861/Description
+ Support HiWiFi HC5861 model(J3)
+endef
+$(eval $(call Profile,HC5861))
diff --git a/target/linux/ramips/mt7628/profiles/hiwifi.mk b/target/linux/ramips/mt7628/profiles/hiwifi.mk
new file mode 100644
index 0000000..7c1c763
--- /dev/null
+++ b/target/linux/ramips/mt7628/profiles/hiwifi.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/HC5661A
+ NAME:=HiWiFi HC5661A
+ PACKAGES:=\
+ kmod-usb-core kmod-usb-dwc2 kmod-usb2 \
+ kmod-mmc-spi kmod-sdhci kmod-sdhci-mt7620 \
+ kmod-ledtrig-usbdev
+endef
+
+define Profile/HC5661A/Description
+ Support HiWiFi HC5661A model(J1S new)
+endef
+$(eval $(call Profile,HC5661A))
--
2.7.4
保存为patch文件，打补丁，make menuconfig，选择对应设备，编译即可。
此补丁是根据目前(2017年01月27日)最新的chaos_calmer分支制作的，若失效，请手动patch。
在极路由2(HC5761)下测试通过，测试前请确保刷入不死uboot，以免报废。
参考连接：https://github.com/rssnsj/openwrt-hc5x61
