expansion board

expansion board什么意思,expansion board翻译

基本解释

un.: 扩展板；扩展卡
网络: 扩充板；扩充卡；多媒体扩充板

英汉解释

• 扩展卡

• 扩展板

例句

• The expansion board attaches to the main board via two connectors, the Expansion Board Connector, shown in Figure 12 and the LCD connector.

  扩充卡经由二个联编者对主要的董事会附上，在图12和LCD联编者被显示的扩充卡联编者。

• The hardware components of the system are divided into two parts: minimum system board and expansion board.

  整个系统的硬件组成分为两个部分——最小系统板与扩展板。

• See Figure 12 - Expansion Board Connector Pin Out, to determine where to insert the jumper.

  参考图12-扩展板接口针脚（排列），以确定如何插入跳线。

• The servo ports are powered directly from the main battery or DC power supply when the expansion board is not present.

  伺服口岸直接地从主要电池或直流电源供给动力当扩充电路板不是存在。

• If you are not using an expansion board, the main board servo ports are powered directly from the main battery or DC power supply.

  如果您不使用扩充电路板，主板伺服口岸直接地从主要电池或直流电源供给动力。

• If you are using an expansion board, you will have several more servo power options, which are discussed in the Expansion Board section.

  如果您使用扩充电路板，您将有几个更加伺服的力量选择，被谈论在扩充电路板部分。

• When the expansion board is installed, the LCD module attaches to the LCD connector on the expansion board.

  当扩充卡被安装的时候，LCD组件在扩充卡上对LCD联编者附上。

• When the expansion board is present, the jumper is not needed because the expansion board always connects the infrared detector electronics.

  如果已经安装好扩展板，则无需使用跳线，因为扩展板总是与红外探测电路相连。

• See the Installing and Removing the Expansion Board section for information on installing and removing the expansion board.

  见到那个安装而且为安装而且除去扩充卡的关于的资讯除去扩充卡区段。

• See the main board power section for more information on powering when not using an expansion board.

  看主板力量部分对于更多信息关于供给动力当不是使用扩充电路板。