angular velocity

angular velocity什么意思,angular velocity翻译

基本解释

n.: 角速度
网络: 旋转角速度；角速率；有角度速率

英汉解释

• 角速度

例句

• and a function for lifting force in terms of rotational angular velocity and angular acceleration was determined.

  确定了升力与旋转角速度及角加速度之间的函数关系。

• and an analysis of the law of transfer arm movement, transfer arm rotational angular velocity is cosine changing law.

  并且对除渣器转臂的运动状况进行了分析，得到了其运动规律成余弦规律变化；

• And the curl of a force field tells you how quickly the angular velocity is going to increase or decrease. OK.

  力场的旋度告诉你，角速度增加或减小的快慢。

• There is an angular velocity at any moment in time, omega, which will change with time, no doubt.

  并且存在一个角速度ω，随时间而改变，毫无疑问的。

• The relative angular velocity between the rotor and the oil cylinder is less than 10% of the rotor angular velocity.

  转子和油缸之间的相对角速度低于转子角速度的10%；

• The spinning solid rocket motor stability depends whether the small transverse angular velocity is exaggerated or diffused.

  旋转固体火箭发动机是否稳定主要取决于其微小的侧向角速度是否被耗散或被放大。

• Therefore, porosity can be reduced through increasing the centrifugal radius and angular velocity in centrifugal field.

  因此，在离心力场作用下可通过提高离心旋转角速度和离心半径减少气孔缺陷。

• The air-phase is modeled and restriction equation of angular velocity of each linkage is obtained.

  对机器人在空中的运动进行了建模和分析，得到了各杆件角速度的约束方程。

• If the angular velocity of a body changes, it is said to have an angular acceleration.

  如果物体的角速度是改变的，就说这个物体具有角加速度。

• Angular velocity grinding and linear velocity grinding are the main grinding method for camshaft.

  工件恒角速度磨削和工件恒线速度磨削是目前精加工凸轮轴的主要磨削加工工艺。