gear-pump

gear-pump什么意思,gear-pump翻译

基本解释

网络: 齿轮泵

例句

• Gear pump by an independent motor drive, to be effective in blocking the upper reaches of the pressure pulsation and flow fluctuations.

  齿轮泵由一个独立的电机驱动，可有效地阻断上游的压力脉动及流量波动。

• At the beginning of operation, to gear pump within the shell filled with liquid to be delivered, for safety launch.

  在开始运转前，往齿轮泵的壳体内灌满待输送的液体，便于安全启动。

• The pump out of the shackles of traditional design, making gear pump in the design, production and use into a new area.

  脱了传统预设的束厄局促，使患上齿轮泵在预设、出产和使用上步入了1个新的领域。

• Gear pump with the direction of rotation into and out in line with the oil mouth.

  齿轮泵的旋转方向要与进、出油口相符。

• Gear pump in the pump is in gear with two small rotation to each other and be accountable to the media do not ask for much.

  在水泵中齿轮泵是用两个齿轮互啮转动来工作，对介质要求不高。

• PEP - II of the gear pump shaft, and the body USES hardening craft, can obtain more long working life.

  PEP-II泵的齿轮与轴共为一体，采用通体淬硬工艺，可获得更长的工作寿命。

• Flexible set cycloid gear pump rotor pump vane pump with the advantages of a similar volume than pump more than 10% efficiency.

  柔性摆线转子泵集齿轮泵与叶片泵优点于一身比同类容积泵的效率提高10%以上。

• It takes the CB gear pump as an example for detailed calculation, demonstrating an effective evaluation method for the assembly ability.

  以CB型齿轮泵为例进行了具体的计算，对产品的可装配性作了评价分析。

• If the ambient temperature below freezing point, should advance to pump hot steam into the intercom, preheating, and then start gear pump.

  若环境温度低于冰点，应预先向泵内通入热蒸汽，进行预热处理，然后才可启动齿轮泵。

• Up to now, the domestic market capacity gear pump roughly 450 million pieces.

  到目前，国内齿轮泵市场产能大致为450万件左右。